FIBER-CARBON FILTER

It has high adsorbability by using dense carbon nonwoven fabric.


Furthermore, low pressure loss and stable filtration flow rate enable to have excellent ability to remove plating solution, organic matter, and residual chlorine.


 


Specification.
Material: PP, PE, powder activated carbon (wooden, coal)
Length: 250 mm to 750 mm
External diameter: Ø 63 mm, internal diameter: Ø 30 mm
Allowable temperature: 65°C or lower
Flow rate: 13LPM or higher (15A, 1kgf/cm² or higher)
Allowable pressure:
0.7 kgf/cm² (raw water pressure) 1 kgf/cm² (filter inlet water pressure)

Application.
Removal of particles, residual chlorine, and organic compounds